Snektek not communicating to renogy controller

Projects related to Solar Power
randr
Posts: 18
Joined: Sat Dec 04, 2021 4:51 pm

Snektek not communicating to renogy controller

Post by randr »

I just got the snektek and verified before purchase that it indeed would work with my controller(Renogy advanced rover Li 40 Amp Mppt charge controller) But so far it cannot communicate to controller and wondering if anyone on forum has any ideas? I can connect to it via wifi no problem and even added entities to HA with no trouble so unit is working that way but all i get is "major Setback! I've Lost Contact with the Solar Controller. Verify integrity of Communication Cable." also log just shows this over and over:
ro] Er: Mod: 226 03-12-2021 21:49:49
[main]: ERROR: Invalid Sample 03-12-2021 21:49:49
[ro] Er: Mod: 226 03-12-2021 21:49:51
[main]: ERROR: Invalid Sample 03-12-2021 21:49:51
[ro] Er: Mod: 226 03-12-2021 21:49:53
[main]: ERROR: Invalid Sample 03-12-2021 21:49:53
[ro] Er: Mod: 226 03-12-2021 21:49:55
[main]: ERROR: Invalid Sample 03-12-2021 21:49:55
[ro] Er: Mod: 226 03-12-2021 21:49:57
[main]: ERROR: Invalid Sample 03-12-2021 21:49:57
[ro] Er: Mod: 226 03-12-2021 21:49:59
[main]: ERROR: Invalid Sample 03-12-2021 21:49:59
[ro] Er: Mod: 226 03-12-2021 21:50:01
[main]: ERROR: Invalid Sample 03-12-2021 21:50:02
[ro] Er: Mod: 226 03-12-2021 21:50:04
[main]: ERROR: Invalid Sample 03-12-2021 21:50:04
[ro] Er: Mod: 226 03-12-2021 21:50:06
[main]: ERROR: Invalid Sample 03-12-2021 21:50:06
[ro] Er: Mod: 226 03-12-2021 21:50:08
[main]: ERROR: Invalid Sample 03-12-2021 21:50:08
[ro] Er: Mod: 226 03-12-2021 21:50:10
[main]: ERROR: Invalid Sample 03-12-2021 21:50:10
[ro] Er: Mod: 226 03-12-2021 21:50:12
[main]: ERROR: Invalid Sample 03-12-2021 21:50:12

Also attaching screenshot of the dashboard error...
Attachments
Screen Shot 2021-12-04 at 7.35.01 AM.png
randr
Posts: 18
Joined: Sat Dec 04, 2021 4:51 pm

Re: Snektek not communicating to renogy controller

Post by randr »

Jonathan has been very helpful and this is now working after he changed code for me to the device id 255. Just updating for anyone having same issue as I did. Thanks Jonathan!
jonathan
Posts: 237
Joined: Thu Feb 01, 2018 1:12 am

Re: Snektek not communicating to renogy controller

Post by jonathan »

Thank you for updating!
Trent
Posts: 1
Joined: Mon Mar 28, 2022 7:12 pm

Re: Snektek not communicating to renogy controller

Post by Trent »

yeah I am having the same issue and it will not update the firmware
Leigh
Posts: 5
Joined: Wed Dec 07, 2022 3:56 pm

Re: Snektek not communicating to renogy controller

Post by Leigh »

I appear to be having the same problem with a renogy rover 20 Li. Solar dashboard is V5.2. Any help appreciated.. Thanks
logs3.txt
(61.29 KiB) Downloaded 843 times
Leigh
Posts: 5
Joined: Wed Dec 07, 2022 3:56 pm

Re: Snektek not communicating to renogy controller

Post by Leigh »

Forgot to add.. Seems not to like power from the rover unit so using external USB supply via micro USB port. Thanks.
jonathan
Posts: 237
Joined: Thu Feb 01, 2018 1:12 am

Re: Snektek not communicating to renogy controller

Post by jonathan »

Leigh wrote:
Wed Dec 14, 2022 5:29 am
I appear to be having the same problem with a renogy rover 20 Li. Solar dashboard is V5.2. Any help appreciated.. Thanks
logs3.txt
It seems like the Rover Lis are using different modbus addresses.

Change your update channel to "none". Then try this firmware attached. Do not "erase flash" setting.. I will be adding a setting to set the modbus address very soon.
firmware_rover_modbus_id_255.zip
(438.03 KiB) Downloaded 800 times
jonathan
Posts: 237
Joined: Thu Feb 01, 2018 1:12 am

Re: Snektek not communicating to renogy controller

Post by jonathan »

Leigh wrote:
Wed Dec 14, 2022 5:35 am
Forgot to add.. Seems not to like power from the rover unit so using external USB supply via micro USB port. Thanks.
There's some variability even among the same batch of renogy units how much power they can put out over the cable. The new V6 hardware uses less power so hopefully this won't be an issue going forward.
Leigh
Posts: 5
Joined: Wed Dec 07, 2022 3:56 pm

Re: Snektek not communicating to renogy controller

Post by Leigh »

Flashed the firmware but still no joy..
logs.txt
(2.73 KiB) Downloaded 866 times
Attachments
logs.txt
(2.73 KiB) Downloaded 781 times
Leigh
Posts: 5
Joined: Wed Dec 07, 2022 3:56 pm

Re: Snektek not communicating to renogy controller

Post by Leigh »

I've read on the Uk T6 forum that the Renogy DC home app using the Bt-1/ Bt2 dongle are changing the models id's.. If that's any help.
Post Reply