I changed the SSID and AP IP for the SNEKTek today, and now it broadcasts the new SSID and will attempt to connect to the network, but keeps disconnecting without acquiring an IP address. When attempting to connect direct via the new SSID, I get an IP address on my phone and laptop, and can ping the SNEKTek for a few cycles, but it does not allow me to access the dashboard, the pings fail after a few seconds, and the AP disappears.
I still have the Renogy Wander supplying supplemental power via USB to pin 6 of the 232 port, and have a USB voltage monitor on it confirming it is getting power. It will also power up and do the same as above without the 232 connected to the Wanderer.
This is a v5.2 board with the external antenna option. It had been running for almost 2 years without issue.
![Exclamation :!:](./images/smilies/icon_exclaim.gif)