Metrics Capture Failing
Posted: Sat Aug 26, 2023 1:22 pm
See screenshot for specific of failure but also other random weirdness like these popup banner error from UI
- Supreme Impediment! I've Lost Track of Time. Data Recording Paused.
- Major setback. I've Lost Contact with the Solar Controller. Verify Integrity of Communication Cable.
My Wifi RSSI signal strength varies from -59 to 62db.
Reading some other posts in this forum I've seen others mention 3 different led lights but when I popped the cover on my device I only have a blinking blue led.
The Snektek device is attached to a new Renogy Adventurer 30a,
Firmware Information
Version: 6.0-f44f74-2023-02-24-06-45
Update Channel: stable
Controller Type: renogy-rs232
Version Notes: Changed MODBUS to asynchronous operation (affects EPEVER, RENOGY, SIGINEER), Added sensors for PLUS model
Here are 2 log entries from different days showing (apparently) different issues.
[main]: Hello World, Begin Setup: 25-08-2023 00:29:41
[main]: Firmware version: 6.0-f44f74-2023-02-24-06-45 25-08-2023 00:29:41
[main]: WiFi Station Status: 0 WiFi Station IP: (IP unset) 25-08-2023 00:29:41
[main]: HTTP server started on port: 80 25-08-2023 00:29:41
[main]: WiFi Station Status: 0 WiFi Station IP: (IP unset) 25-08-2023 00:29:41
[updater]: Checking for updates, retry=1/6 25-08-2023 00:29:41
[updater]: Failed to connect to mysolardashboard.snektek.com:8123 25-08-2023 00:29:41
[updater]: Update check result: failed_to_connect 25-08-2023 00:29:41
[updater]: Checking for updates, retry=2/6 25-08-2023 00:29:44
[updater]: Connected to mysolardashboard.snektek.com:8123 25-08-2023 00:29:45
[updater]: Update check result: no_update 25-08-2023 00:29:45
[clock]: RTC epoch: 1692923388 25-08-2023 00:29:48
[clock]: NTP epoch 1692923388 25-08-2023 00:29:48
[clock]: NTP epoch 1692923388 25-08-2023 00:29:48
[clock]: NTP updated RTC 25-08-2023 00:29:48
[mqtt_client]: not enabled. 25-08-2023 00:29:48
[main]: ERROR: Invalid Sample 25-08-2023 00:29:49
[clock]: RTC epoch: 1692923393 25-08-2023 00:29:53
[clock]: NTP epoch 1692923393 25-08-2023 00:29:53
[clock]: NTP epoch 1692923393 25-08-2023 00:29:53
[clock]: NTP updated RTC 25-08-2023 00:29:53
[main]: WiFi Station Status: 1 WiFi Station IP: 192.168.5.188 25-08-2023 00:29:53
[MODBUS]: Error: Response timeout 25-08-2023 00:30:13
[sd_card]: Wrote Sample: 2023/08/25/data.txt 25-08-2023 00:30:48
******SNEKTEK****** 00-00-1970 00:00:00
******************* 00-00-1970 00:00:00
[reboot_stat]: lastUpdatedTime: 0 rebootCount: 35992 rebootCause: NORMAL 00-00-1970 00:00:00
[supervisor]: Checking Power Supply... 00-00-1970 00:00:00
[supervisor] Power supply Voltage:3.47 00-00-1970 00:00:00
[supervisor] Power supply Voltage Stable. Continue... 00-00-1970 00:00:00
[sd_card]: Power Cycle (Slow Ramp) 00-00-1970 00:00:00
[clock]: RTC-I2C Comms Initialized. 00-00-1970 00:00:00
[light]: Light Sensor Setup 26-08-2023 02:02:18
[light]: Setup IO error 26-08-2023 02:02:18
[Environment]: Environment sensor Initialization 26-08-2023 02:02:18
[Environment]: device not found 26-08-2023 02:02:18
[sd_card]: Found config key value pair debugEnabled=1 26-08-2023 02:02:18
[main]: Hello World, Begin Setup: 26-08-2023 02:02:18
[main]: Firmware version: 6.0-f44f74-2023-02-24-06-45 26-08-2023 02:02:18
[main]: WiFi Station Status: 0 WiFi Station IP: (IP unset) 26-08-2023 02:02:18
[main]: HTTP server started on port: 80 26-08-2023 02:02:18
[main]: WiFi Station Status: 0 WiFi Station IP: (IP unset) 26-08-2023 02:02:18
[updater]: Checking for updates, retry=1/6 26-08-2023 02:02:18
[updater]: Failed to connect to mysolardashboard.snektek.com:8123 26-08-2023 02:02:18
[updater]: Update check result: failed_to_connect 26-08-2023 02:02:18
[updater]: Checking for updates, retry=2/6 26-08-2023 02:02:21
[updater]: Failed to connect to mysolardashboard.snektek.com:8123 26-08-2023 02:02:21
[updater]: Update check result: failed_to_connect 26-08-2023 02:02:21
- Supreme Impediment! I've Lost Track of Time. Data Recording Paused.
- Major setback. I've Lost Contact with the Solar Controller. Verify Integrity of Communication Cable.
My Wifi RSSI signal strength varies from -59 to 62db.
Reading some other posts in this forum I've seen others mention 3 different led lights but when I popped the cover on my device I only have a blinking blue led.
The Snektek device is attached to a new Renogy Adventurer 30a,
Firmware Information
Version: 6.0-f44f74-2023-02-24-06-45
Update Channel: stable
Controller Type: renogy-rs232
Version Notes: Changed MODBUS to asynchronous operation (affects EPEVER, RENOGY, SIGINEER), Added sensors for PLUS model
Here are 2 log entries from different days showing (apparently) different issues.
[main]: Hello World, Begin Setup: 25-08-2023 00:29:41
[main]: Firmware version: 6.0-f44f74-2023-02-24-06-45 25-08-2023 00:29:41
[main]: WiFi Station Status: 0 WiFi Station IP: (IP unset) 25-08-2023 00:29:41
[main]: HTTP server started on port: 80 25-08-2023 00:29:41
[main]: WiFi Station Status: 0 WiFi Station IP: (IP unset) 25-08-2023 00:29:41
[updater]: Checking for updates, retry=1/6 25-08-2023 00:29:41
[updater]: Failed to connect to mysolardashboard.snektek.com:8123 25-08-2023 00:29:41
[updater]: Update check result: failed_to_connect 25-08-2023 00:29:41
[updater]: Checking for updates, retry=2/6 25-08-2023 00:29:44
[updater]: Connected to mysolardashboard.snektek.com:8123 25-08-2023 00:29:45
[updater]: Update check result: no_update 25-08-2023 00:29:45
[clock]: RTC epoch: 1692923388 25-08-2023 00:29:48
[clock]: NTP epoch 1692923388 25-08-2023 00:29:48
[clock]: NTP epoch 1692923388 25-08-2023 00:29:48
[clock]: NTP updated RTC 25-08-2023 00:29:48
[mqtt_client]: not enabled. 25-08-2023 00:29:48
[main]: ERROR: Invalid Sample 25-08-2023 00:29:49
[clock]: RTC epoch: 1692923393 25-08-2023 00:29:53
[clock]: NTP epoch 1692923393 25-08-2023 00:29:53
[clock]: NTP epoch 1692923393 25-08-2023 00:29:53
[clock]: NTP updated RTC 25-08-2023 00:29:53
[main]: WiFi Station Status: 1 WiFi Station IP: 192.168.5.188 25-08-2023 00:29:53
[MODBUS]: Error: Response timeout 25-08-2023 00:30:13
[sd_card]: Wrote Sample: 2023/08/25/data.txt 25-08-2023 00:30:48
******SNEKTEK****** 00-00-1970 00:00:00
******************* 00-00-1970 00:00:00
[reboot_stat]: lastUpdatedTime: 0 rebootCount: 35992 rebootCause: NORMAL 00-00-1970 00:00:00
[supervisor]: Checking Power Supply... 00-00-1970 00:00:00
[supervisor] Power supply Voltage:3.47 00-00-1970 00:00:00
[supervisor] Power supply Voltage Stable. Continue... 00-00-1970 00:00:00
[sd_card]: Power Cycle (Slow Ramp) 00-00-1970 00:00:00
[clock]: RTC-I2C Comms Initialized. 00-00-1970 00:00:00
[light]: Light Sensor Setup 26-08-2023 02:02:18
[light]: Setup IO error 26-08-2023 02:02:18
[Environment]: Environment sensor Initialization 26-08-2023 02:02:18
[Environment]: device not found 26-08-2023 02:02:18
[sd_card]: Found config key value pair debugEnabled=1 26-08-2023 02:02:18
[main]: Hello World, Begin Setup: 26-08-2023 02:02:18
[main]: Firmware version: 6.0-f44f74-2023-02-24-06-45 26-08-2023 02:02:18
[main]: WiFi Station Status: 0 WiFi Station IP: (IP unset) 26-08-2023 02:02:18
[main]: HTTP server started on port: 80 26-08-2023 02:02:18
[main]: WiFi Station Status: 0 WiFi Station IP: (IP unset) 26-08-2023 02:02:18
[updater]: Checking for updates, retry=1/6 26-08-2023 02:02:18
[updater]: Failed to connect to mysolardashboard.snektek.com:8123 26-08-2023 02:02:18
[updater]: Update check result: failed_to_connect 26-08-2023 02:02:18
[updater]: Checking for updates, retry=2/6 26-08-2023 02:02:21
[updater]: Failed to connect to mysolardashboard.snektek.com:8123 26-08-2023 02:02:21
[updater]: Update check result: failed_to_connect 26-08-2023 02:02:21